190 Series Biomass Gas
Generator Set
The materials are pyrolyzed and gasified in biomass gasifier to produce combustible gas fuel and drive
the engine to work.
POWERMAX 190 Series Gas Generator Sets are named after their 190 mm cylinder bore and operate at a rated speed of 1,000 rpm. With a power output range of 400 kW to 1,200 kW, the series is ideally suited for clean energy power generation projects utilizing coal mine methane (CMM), natural gas, and biogas.The generator sets deliver high operational efficiency, achieving a thermal efficiency of up to 40%. Under standard conditions, each cubic meter of pure methane (CH₄) can generate up to 4 kWh of electricity. In addition, the units feature low exhaust emissions, meeting stringent environmental requirements and exceeding the performance requirements of China Stage IV emission standards.
The 190 Series Gas Generator Sets are equipped with components from world-leading brands and can be paired with Various alternators to meet diverse project requirements. Offering high reliability, low operating costs, and rapid deployment through containerized configurations, the series enables the fast establishment of power plants and represents an ideal solution for gas-fired power generation projects.
Technical Features
Application Gas Source Requirements
≤ 40 ℃
Inlet Gas Temperature
≥ 4.0 mg/Nm3
Gas Calorific Value
2.5 ~ 10 kPa
Gas Pressure
≤ 1 kPa/min
Pressure Change Rate
≤ 5 μm
Dust Particle Size
≤ 100 mg/Nm3
Total Sulfur Content
≤ 50 mg/Nm3
Tar Content
≤ 30 mg/Nm3
Dust Content
≤ 1%
Oxygen Volume
≤ 50 mg/Nm3
Chlorine
≤ 50%
Hydrogen Volume
≤ 20 mg/Nm3
Ammonia
≤ 40 g/Nm3
Water Content, No Free Water
≤ 50 mg/Nm3
Hydrogen Sulfide Content
190 Series 400 – 1200KW Natural Gas/Biogas /Generator Set
Technical Parameter (50Hz/60Hz)
Learn More About Product Through Projects
Indonesia
Biomass Power Project
Capacity：2MW
Location：Indonesia
Raw Material：Wood Chips
Taiwan 500kW
Biomass Power Generation Project
Capacity：500KW
Location：Taiwan
Raw Material：Wood Chips
